Zep Silicone Sealant Remover Gel 100ml with Built-In Brush Cap for Cured Silicone and Acrylic Sealant

£3.59

13 in stock

Description

Zep Silicone Sealant Remover Gel 100ml with Built-In Brush Cap for Cured Silicone and Acrylic Sealant

  • Effective gel formulation: Designed to soften and break down cured silicone sealant and acrylic sealant residue for easier mechanical removal.
  • 100ml bottle with brush cap: The integrated brush inside the cap enables controlled application directly onto old sealant and residue.
  • Suitable for non-porous surfaces: Intended for use on surfaces such as ceramic, glass and suitable plastics; compatibility should always be tested first.
  • Ideal for resealing preparation: Helps remove remaining sealant residue so the surface can be cleaned and prepared before applying fresh sealant.

Zep Silicone Sealant Remover is a 100ml gel formulated to help remove cured silicone and acrylic sealant residue during bathroom, kitchen and general home maintenance projects. It is particularly useful when replacing old bathroom silicone, removing unwanted caulk or preparing joints and edges for fresh sealant.

The gel formulation is applied directly to the remaining sealant using the brush incorporated into the bottle cap, allowing targeted application around joints, corners and other areas where old silicone has accumulated. Zep’s published instructions recommend first removing as much of the old sealant as possible mechanically, then applying the remover generously without spreading it too thinly. The product should be allowed to penetrate for approximately 15 minutes before the softened residue is carefully scraped away. If necessary, the treatment can be left longer or repeated.

After removal, Zep recommends wiping away the residue, washing the treated area with soapy water and drying it thoroughly before applying new sealant. Always perform a small compatibility test first, particularly on plastic bath panels and painted wood, as solvent-based sealant removers can affect sensitive or finished surfaces.

The product is supplied as a single 100ml container with an integrated application brush. It does not include a separate silicone-removal scraper or multi-angle silicone tool unless specifically stated by the seller; the standard retail pack is listed as one Zep Silicone Sealant Remover 100ml.

Product Benefits

  • Helps soften cured silicone and acrylic sealant residue for easier removal.
  • Built-in brush allows precise application without requiring a separate applicator.
  • Helps prepare compatible surfaces for clean, effective resealing.

Features & Specifications

  • Brand: Zep
  • Product type: Silicone sealant remover
  • Form: Gel
  • Volume: 100ml
  • Colour: Clear
  • Application: Removal of cured silicone and acrylic sealant residue
  • Application method: Brush integrated into bottle cap
  • Suitable surfaces: Non-porous surfaces including ceramic, glass and suitable plastics
  • Interior/Exterior: Suitable for interior and exterior applications when the substrate is compatible.
  • Working time: Approximately 15 minutes initial penetration time; additional time or repeat application may be required for stubborn residue.
  • Water resistance: Not water resistant

Measurements

  • Product volume: 100ml

Materials & Care Instructions

  • Product composition/form: Gel sealant-removal formulation.
  • Remove as much old sealant as possible with a sharp knife before application.
  • Shake the bottle thoroughly and apply a generous layer using the brush inside the cap.
  • Allow approximately 15 minutes for penetration, then carefully scrape with a non-scratch scraper.
  • Repeat or allow additional penetration time if residue remains.
  • Wipe away residue, wash the surface with soapy water and dry thoroughly before resealing.
  • Safety: The product carries a warning for serious eye irritation and may cause skin dryness or cracking with repeated exposure. Protective gloves and suitable eye/face protection are recommended, and the label should be followed. Keep out of reach of children.
  • Always test compatibility on an inconspicuous area, particularly painted wood and plastic bath panels.

Included Components

  • 1 × Zep Silicone Sealant Remover Gel, 100ml, with integrated brush cap.

Additional information

Weight 150 g
gtin

5060411281219

Model Number

281219

Main Colour

White

Brand

Zep