Zep Mould & Mildew Stain Remover Spray 750ml Industrial Strength Bleach Formula for Tiles Grout Fibreglass & Acrylic

Description

Zep Mould & Mildew Stain Remover Spray 750ml Industrial Strength Bleach Formula for Tiles Grout Fibreglass & Acrylic

• Industrial-strength formula: Ready-to-use liquid cleaner designed to dissolve mould, mildew and associated discolouration.
• 750ml trigger spray: Convenient spray bottle provides controlled application without dilution.
• Multiple bathroom surfaces: Suitable for toilet bowls, sinks, baths, ceramic tiles, fibreglass, acrylic and grout.
• Bleach-based whitening action: Helps whiten discoloured fibreglass, tiles and grout while treating mould and mildew stains.

Zep Mould & Mildew Stain Remover is a ready-to-use, industrial-strength bathroom cleaning solution formulated to tackle mould, mildew and stubborn discolouration. Supplied in a convenient 750ml trigger spray bottle, it is designed for direct application without dilution, making it practical for routine bathroom and household cleaning.

The formula uses chlorine-based bleaching agents to help break down mould and mildew staining while whitening suitable surfaces. It can be used on toilet bowls, sinks and baths, as well as ceramic tiles, fibreglass, acrylic and grout. The product is particularly suited to areas where mould and mildew commonly cause dark or discoloured deposits, including bathroom surfaces and tile grout.

For general cleaning, spray the product onto the affected surface and allow it to work for approximately 2–3 minutes. Do not allow the solution to dry. Rinse thoroughly and repeat the treatment if required. For heavier deposits, the supplied product information also recommends agitation with a suitable non-scratch pad or soft brush before wiping and rinsing. Always test an inconspicuous area first and follow the instructions and safety information printed on the product label.

If the product contacts unsuitable surfaces, rinse immediately. Safety information identifies the product as capable of causing skin and serious eye irritation and harmful to aquatic life with long-lasting effects; appropriate protective equipment and label precautions should therefore be followed.

Product Benefits

• Helps remove visible mould, mildew and associated stains.
• Whitens suitable tile, grout and fibreglass surfaces.
• Ready-to-use trigger spray requires no dilution.

Features & Specifications

• Brand: Zep
• Product type: Mould & Mildew Stain Remover
• Volume: 750ml
• Container type: Trigger spray bottle
• Form: Liquid spray
• Ready to use: Yes; not concentrated
• Ingredients: Chlorine-based bleaching agents; anionic surfactants less than 5%.

Measurements

• Product volume: 750ml
• Application: Spray from approximately 15–20cm from the affected area.
• Suitable surfaces: Ceramic tiles, fibreglass, acrylic, grout, toilet bowls, sinks and baths.

Materials & Care Instructions

• Contents: Liquid cleaning formulation containing chlorine-based bleaching agents and anionic surfactants.
• Application: Spray onto the surface, leave for 2–3 minutes and do not allow to dry. Rinse thoroughly; repeat if necessary.
• Maintenance/safety: Always test on an inconspicuous area first. Wear suitable protective gloves and eye/face protection. Keep the container tightly closed and store in a cool, dry place.
• Do not use on: Taps, metal, vinyl, Formica, painted surfaces, marble or sensitive stone. Rinse immediately if the product contacts unsuitable surfaces.

Included Components

• 1 × Zep Mould & Mildew Stain Remover 750ml trigger spray bottle