Hilka Flap Wheels 5 Piece Mixed Grit 50 x 25mm Aluminium Oxide 6mm Shank Wood & Metal

Description

Hilka Flap Wheels 5 Piece Mixed Grit 50 x 25mm Aluminium Oxide 6mm Shank Wood & Metal

• Aluminium oxide abrasive: Designed for effective sanding, deburring, smoothing and surface preparation on wood and metal.
• 50 x 25mm flap wheels: Compact mounted wheels provide access to smaller work areas, edges, contours and hard-to-reach surfaces.
• Mixed grit selection: Includes 60, 80, 120, 180 and 240 grit wheels for coarse material removal through to finer finishing.
• 6mm shank and 2,000rpm maximum: Suitable for compatible rotary tools, die grinders and other machines accepting a 6mm shank; do not exceed the stated maximum safe working speed.

The Hilka 5 Piece Mixed Grit 50 x 25mm Flap Wheel Set provides a practical selection of aluminium oxide abrasive wheels for sanding, finishing, deburring and surface preparation. The set contains five different grit grades—60, 80, 120, 180 and 240—allowing the user to progress from relatively coarse material removal to finer surface finishing without requiring multiple separately purchased sets.

Each mounted flap wheel measures 50mm in diameter by 25mm wide and incorporates a 6mm shank, making the wheels suitable for compatible rotary tools and grinders designed to accept this shank size. The overlapping abrasive flaps conform to curved and contoured surfaces and progressively expose fresh abrasive as the wheel wears, making flap wheels useful for general surface preparation and finishing work. Comparable mounted aluminium oxide flap wheels are commonly used for deburring, smoothing and working on irregular or difficult-to-access surfaces.

The 60 grit wheel is suited to more aggressive initial sanding and material removal, while the 80 and 120 grit grades provide progressively smoother finishing. The 180 and 240 grit wheels are appropriate for finer surface preparation and finishing. Hilka specifies the set for use on wood and metal and gives a maximum safe working speed of 2,000 rpm.

This mixed-grit flap wheel set is suitable for DIY, workshop, maintenance and general fabrication applications where different levels of abrasion may be required during a single project. Always use the wheels with a compatible tool, secure the workpiece appropriately, follow the tool instructions and remain within the maximum rated speed.

Product Benefits

• Five grit grades provide versatility for coarse sanding through fine finishing.
• Aluminium oxide abrasive is suitable for general-purpose wood and metal surface preparation.
• Mounted 6mm shanks allow use with compatible rotary tools and grinders.

Features & Specifications

• Brand: Hilka
• Product type: Mounted flap wheel set
• Pack quantity: 5 pieces
• Wheel size: 50 x 25mm
• Shank diameter: 6mm
• Abrasive: Aluminium oxide
• Grits included: 60, 80, 120, 180 and 240
• Maximum safe working speed: 2,000 rpm
• Suitable materials: Wood and metal

Measurements

• Individual wheel: approximately 50mm diameter x 25mm width
• Shank: 6mm diameter
• Dimensions supplied: 295 x 90 x 80mm (29.5 x 9 x 8cm)

Materials & Care Instructions

• Abrasive material: Aluminium oxide.
• Construction includes abrasive flaps mounted around a central hub with a 6mm shank.
• Store in a clean, dry location away from moisture and excessive heat.
• Do not use damaged, cracked or excessively worn wheels.
• Use appropriate eye, respiratory and hearing protection for the application.
• Follow the compatible power-tool operating and safety instructions and do not exceed 2,000 rpm.

Included Components

• 1 x 60 grit 50 x 25mm flap wheel
• 1 x 80 grit 50 x 25mm flap wheel
• 1 x 120 grit 50 x 25mm flap wheel
• 1 x 180 grit 50 x 25mm flap wheel
• 1 x 240 grit 50 x 25mm flap wheel