HG Tile Protector Product 14 – 1 Litres

Description

HG Tile Protector Product 14 – 1 Litres

• A wafer-thin yet extremely protective coating
• Protects against penetration of dirt, stains, and wear
• For all types of floor tiles, flagstones and slate
• Adds a satin finish
• Extremely simple to apply
• Tile finish that protects against wear and scratches

HG Tile Protector Product 14

HG tile protector is a unique and easy-to-apply tile finish polymer emulsion for all types of floor tiles, flagstone, and slate. After drying, this liquid emulsion forms a shiny and wafer-thin, yet extremely protective coating.

Tile finish protective coating that deepens color and structure

The wafer-thin yet extremely protective tile coating protects floor tiles against wear, scratches, and other damage. HG tile protector also deepens the color and structure of the floor tiles. This protective tile coating for floor tiles, flagstone, and slate also masks existing worn patches and even has a non-slip effect. 1 liter is sufficient for approximately 40 m2 per layer.

HG Protective Coating Satin Gloss Finish:

An easy-to-apply polymer emulsion sealer that protects against wear & damage to the top layer of stone

Floor protector for natural stone tiles:

This emulsion forms a wafer-thin satin glossy yet extremely protective coating, to help seal the stone & restore its natural shine

Won’t damage your flooring:

Safe to use on marble, slate, quartz, flagstones & all other types of natural stones in the hall, dining area, or kitchen

Fast-drying anti-slip matte formula:

This protective sealer film for natural stone tiling also has an anti-slip effect. 1 litre is enough for approx. 40 m2 per layer

1 Litre bottle of HG Protective Coating Satin Gloss Finish:

Dilute 1:1 with cold water & spread over the floor. After 40 minutes a 2nd coat can be applied

The product should not be used in rooms that can be wet, such as bathrooms.

How do you use an HG tile protector?

Follow the steps below for the correct use of the HG tile protector (HG product 14). 1 liter is sufficient for approximately 40 m2 per layer. For regular cleaning with a floor cloth, we recommend HG Tile Cleaner Shine Restorer (HG product 17).

1. The surface must be completely clean and free of grease and dust.
2. The glue/paste and grout of the new floor must be completely cured and dry. This usually takes 4-6 weeks of drying.
3. Do not shake before use and preferably apply with a wax spreader (see bottle label on the front). It is also possible to use a lint-free, clean towel wrapped around a squeegee. On rough surfaces use a (long-pile) paint roller.
4. Pour the tile finish liquid onto the floor and apply evenly in straight lanes and in one direction. Do not use circular motions or pressure.
5. Once the product has dried (after about 40 minutes), a second layer can be applied in the opposite direction onto the first layer.